AEO ADS-300L water cooling motor advance:
Breaking through the traditional cooling way. The cool water contacts with heat
source of the motor directly, not to increase motor dimension at the same time.
Ultra-high heat sink efficiency, making it life longer by the water cooling
circle in the center of the motor.
Compared with traditional outside cooling way of outrunner water-cooling motor,
the breakthrough of AEO ADS-300L water-cooling motor: Cool the stator inside
Traditionally, there is a special cooling area in the front of motor.
AEO cooling way called "Center pillar cooling". The cool water circles in the
center pillar to get away the heat.
Tested with AEO
E-Power 30A ESC
No Load Data:
Max. Power :
24A or 300W
23.8 x 45(mm)
Length of shaft:
Diameter of shaft:
This motor can be easier to keep cool because of the special design: water
comes through not only the top but also the middle (center pole) of the motor.