Mini Camera Mount(servos+bearings)
For use with the X-GYRO, this is a pan/tilt camera mount system for your camera that can be controlled with 2 R/C servos.
Standard R/C servos will get about a 90° total throw, which is enough for the tilt axis. However, it would be very useful if the pan servo can throw over a wider range. This can be done by hardware servo modification, but in order to easy the challenge, we have developed the Servo Expansion module that can double the movement command received from the TX once plugged between the receiver and the servo. This allows using the maximal throw the servo’s mechanical limits will accept, usually around 180°. We recommend using it on the Pan axis.
More products you may be interested in....