The World's Most Powerful,
Brushless Electric Monster Truck!
Equipped with Castle Creation's Mamba Monster Brushless System
Up to 25.2 Volts of Massive Brushless Power
Includes New Traxxas TQ 2.4GHz Radio System with 4-Channel Micro
State-of-the-Art Integrated Chassis Design
Heavy-Duty 17mm Splined Aluminum Hex Hubs and Wheel Nuts
Hard-Anodized Teflon®-Coated Aluminum Shocks
Top Speed: 65+mph All-Out, 50+mph Out of the Box!
We built the E-Revo for 6S brushless power right
from the start. For other companies, brushless ready means just making some
nominal provisions for battery and motor installation and letting the
aftermarket develop the upgrades necessary to make it survive. Not Traxxas. We
heard the call for more power so E-Revo was tested
tough for durability with brutal 6S LiPo power and intense custom wound
brushless motors. For the uninitiated, this extreme 65+mph motor and battery
combination is ordinarily a predictable recipe for a box full of twisted and
mangled parts. Not so with the E-Revo Brushless
Edition. E-Revo’s driveline has been engineered to
endure the kind of horsepower and punishment that’s possible with today’s motor
and battery technology. It looks factory because it is factory, complete with a
separate motor plate for clean, low-slung single motor installation.
Castle Creations Mamba Monster Brushless System
Built specifically to handle the rigors of large, power-hungry trucks, the Mamba
Monster speed control is ready for 6S LiPo power with its massive 6.5mm
gold-plated connectors, high-efficiency heatsink, integrated cooling fan and
heavy-duty components. The speed control sends its power pulses to a Castle
2200Kv 75mm motor, designed specially for maximum performance and reliability
with 6S LiPo power in torque-hungry applications. The aluminum motor can is
machined to act as a massive heatsink, high-grade bearings deliver maximum
efficiency, and high-strength Neodymium magnets give E-Revo
brushless edition outrageous torque. To resist the twist, a beefy 5mm shaft
transfers power to Brushless-Ready transmission.
**NOTE** Car kit does not include battery.
Battery is sold separately.
TQ 2.4GHz Transmitter
and 4-channel Micro Receiver
All new for E-Revo Brushless edition is Traxxas TQ
2.4GHz radio system. Traxxas' proven ergonomic TQ design now houses
spread-spectrum circuitry, eliminating the need for crystals and channels. Just
switch on and drive; the 2.4GHz circuitry automatically locates an open channel
for glitch-free operation. The new 4-channel micro receiver has an integrated
link button for fast syncing with the transmitter.
Engineered by Traxxas, the ground-breaking molded E-Revo
chassis sets a new benchmark for electric monster truck looks and performance.
The E-Revo chassis combines art and function to
deliver a lightweight, integrated, and rigid platform that maximizes strength
and reduces weight. Scalable battery compartments accept a variety of NiMH and
LiPo configurations to unlock E-Revo Brushless
edition's power potential. By combining the battery compartments with the
chassis design, the battery packs can sit low and close to the center of the
truck, plus valuable chassis surface is freed up to accommodate the electronics
for a clean layout. This keeps the center of gravity (CG) as low as possible and
increases side-to-side agility by keeping most of the weight close to the
Resembling the exhaust ducts of a turbine powered jet, the futuristic battery
vents are securely mounted on the chassis. In addition to offering entrance and
exit cooling, the oversized openings incorporate latches that insert into the
battery door clasps. The battery compartment vents symbolize the sleek and
high-tech image that places E-Revo in a class of
Quick Release Battery Doors
The futuristic chassis design incorporates enclosed battery compartments into
the sides of the chassis for an ultra-clean look even with the battery packs
installed. Innovative quick release battery doors mount directly to the chassis,
so there are no clips or hold downs to lose during battery swaps. The doors
pivot down using a hinged design and dual clasps secure the tops of the battery
doors for impact-proof security. To open the battery doors depress the latches
and pull on the battery door tabs. To close the doors simply press on the door
until the latches snap into place.
Keyed, adjustable L-braces located inside the battery compartments allow the
battery packs to be positioned in multiple incremental positions from front to
rear for precise weight bias tuning. A top mounted, spring loaded clip holds
battery packs securely at the lowest point to keep the CG as low as possible.
E-Revo takes a total system approach to eliminating
the slow, mushy steering response typical on other monster trucks. Each servo is
rated for 125 oz.-in. of torque, giving E-Revo a
total of 250 oz.-in. of tire-turning twist to keep you in command no matter how
tough the conditions.
Leading The Way
There is no other electric monster truck like E-Revo.
It embodies the highest level of creativity in design and engineering skill to
create the absolute best in monster truck performance. E-Revo
is the benchmark that could only come from Traxxas, the leaders in innovation
NEW FEATURES ON E-REVO
BRUSHLESS EDITION (MODEL 5608)
Castle Creations Mamba Monster ESC
Castle Creations Mamba Monster 2200KV Motor
Traxxas TQ 2.4GHz Radio
Speed control hold-down securely attaches to the chassis
Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
Factory Installed and Programmed Castle
Creations Mamba Monster Electronic Speed Control System
This heavy-duty setup includes Castle's 2200kV motor for full 6S LiPo (25.2
volts max) combatibility, which gives E-Revo the ability to exceed 60mph with
wheel-lifting torque and brutally quick acceleration. The Mamba Monster
controller features a cooling fan and heavy-duty construction with oversized
6.5mm connectors to eliminate “thermaling,” and the motor uses a 5mm rotor shaft
for added durability.
High-Current Connectors The Mamba Monster Brushless system comes equipped with two new Traxxas
High-Current Connectors. Designed to handle high-current applications, Traxxas
Connectors effortlessly funnel the dual battery's total power to the electronics
keeping things running cool and at full capacity.
A ground-breaking new weather-sealed receiver box is another Traxxas innovation
that puts E-Revo in a league of its own. The
antenna and servo wires route neatly a special watertight seal (patent pending).
To protect the receiver from dust and water a custom shaped blue O-ring seals
the receiver box. Thanks to the unique design, the receiver can be removed for
service and even aftermarket receivers can be used, without losing the sealing
properties of the box.
Waterproof Steering Servos
Waterproof digital steering servos (#2075) use O-ring seals to keep the fun
going when things get wet. Twin digital high-torque servos provide the muscle to
drive a single heavy-duty servo saver. Twin servos are lighter and more compact
than a single large servo, and together they deliver unmatched monster steering
response. The servo saver rides on ball bearings to keep the steering response
smooth and precise.
17mm Hex Hubs
E-Revo Brushless Edition's 17mm splined aluminum hex hubs make certain its
considerable horsepower is delivered directly to the treads. The splined design
is extra strong with unsurpassed torque handling to resist twist-out no matter
how hard the 2200Kv motor pulls at the tires.
For Today And Beyond
E-Revo's battery compartments are scaleable for
today's batteries and new generations of batteries to come. A clever internal
stop is adjustable for battery length while an innovative leaf spring holds the
battery pack secure. Choose your power from 6 or 7-cell NiMH packs all the way
up to large-capacity LiPo (Lithium Polymer) Power.*
Quick-Release Battery Doors An Industry First! E-Revo uses an
innovative solution for easy battery installation. Quick release battery doors
snap open and closed in seconds for fast and easy battery installation. There
are no clips to lose in the field and the potential for battery changes during
pit stops opens the door for a whole new class of electric monster truck racing.
The battery enclosures are vented with artfully designed intakes and exits to
provide cooling air to the batteries. Nothing was overlooked in developing the
ultimate electric monster truck platform.
There is no more important single component than the chassis. The chassis
construction and rigidity affect all aspects of how you interact with the model.
From how it handles to how easily you can install batteries, the
E-Revo chassis is both art, and engineering
The smooth center skid plate is by itself a sight to behold while it protects
and strengthens. Critical driveline components are shielded from the elements
for long life. A cover provides access for maintenance. Careful attention to
design raises torsional rigidity to eliminate chassis flex which contributes to
E-Revo's stunning handling precision.
The superior technology designed into the Revo suspension provides capability,
performance, and tuning functions that are so far advanced they set the Revo
specification at the absolute pinnacle of monster truck design. Dig into the
details and you will see how E-Revo lets you
experience precision and performance that's simply not possible with
conventional designs. With multiple design patents pending, nothing else even
The E-Revo's fully trimmed and painted ProGraphix body is available in Red,
Blue, Red-Black, and Blue-Black. Decals are also applied to save you time and
get you driving just minutes out of the box. Traxxas' ProGraphix bodies are the
hottest looking bodies around and are only available on Traxxas Ready-To-Race®
Most Suspension Travel
Revo architecture delivers the most suspension travel possible, tunable
progressive damping rates, independent ride height adjustment, and the absolute
highest level of control for any situation. The precision aluminum shocks are
rigidly mounted to the chassis, protected from dirt, rocks, and crash damage.
E-Revo's transmission design is skillfully
configured to fit low in the chassis and to also keep the motor(s) mounted as
low as possible. This consistent design theme contributes to the handling
benefits derived from E-Revo's optimized center of
gravity. An oversized steel idler gear and the patent-pending Torque-Control™
slipper clutch are built to handle the massive torque of high-performance
The new single-speed Brushless-Ready™ transmission features an oversized steel
idler gear and a Torque-Control™ slipper clutch to handle the massive torque of
high-performance brushless motors. To access spur and pinion gears quickly and
easily, a unique single-piece gear cover can be removed and installed with a
single hex screw. For additional tuning options an accessory single motor
installation kit and two-speed gear sets are available.
Note: This is a special order item which takes a little more time to coordinate and ship.