HPI Gas RS4 MT2 G3.0 RTR RC 4WD RC Monster Truck - 10410
The Ready-To-Run Nitro MT 2 G3.0… MORE POWER, MORE SPEED!
New G3.0 Engine
How do you make the next generation Nitro MT 2 truck even better? Add more power, more speed, and extra durability! We added the powerful and exciting G3.0 engine which has already been setting things alight in the Firestorm 10T. The G3.0 has .18 cubic inches of displacement (versus .15 cubic inches on the T-15 engine) that helps it crank out more torque and higher top speed, propelling the Nitro MT 2 G3.0 to over 45mph! Now that's FAST!
For maximum power we optimized the gear ratios for the G3.0 engine and added a new aluminum dual chamber tuned pipe and aluminum tube header to help the engine breathe freely and efficiently, and a new high flow dual-stage air filter that helps keep out dust and dirt for extended engine life! A new 100cc fuel tank is 50% larger than the original Nitro MT 2 fuel tank for extended run time between pit stops.
Long suspension arms and shocks
on both front (above) and rear (below).
To handle the extra power, the chassis and suspension have been upgraded with redesigned front suspension parts for improved strength, a heavy-duty clutch bell, and tougher diff gear material for extra durability. The combination is tough to beat… tougher and faster, all in a ready-to-run 4WD 1/10th scale truck platform that has extensive parts support and tuning options.
The all-new Dirt Force body is pre-painted with bold graphics, and comes pre-trimmed and mounted to the chassis with the decals pre-applied for the ultimate in ease and good looks. It doesn’t get easier than that! And now you have the choice of two different body colors, deep metallic blue with silver and black stripes, or bright red with orange and black stripes. To top everything off we added shiny chrome 6-spoke “Scorch” off-road wheels, realistic Yokohama Geolander tires, and a stealthy grey anodized chassis!
Add all of these new features and upgrades to everything that's already great about the Nitro MT 2 chassis and you get a fast and tough off-road truck that works great for racing and bashing! Extra-long suspension arms cushioned with long-stroke oil-filled shocks to soak up the bumps, tough shaft drive 4WD system for maximum grip on any surface, a full set of sealed ball bearings for efficiency, and a removable radio tray that lets you quickly clean and work on the truck… it’s all there on the Ready-To-Run Nitro MT 2 G3.0!
The HPI Nitro Star G3.0 is a 3.0cc (.18 cubic inch) high output engine with a racing standard SG shaft for optimal power transfer to the transmission. An aluminum crankcase with cooling fins and large heatsink head provide optimal cooling for long engine life and consistent performance. An aluminum tuned pipe and aluminum tube header give stump-pulling torque and scorching top speed!
The easy to use Roto Start 2 hand held electric starter and a dual stage foam filter round out the engine package to make it the ultimate power source.
The Nitro MT 2 G3.0 is available in two awesome color schemes: deep metallic blue with silver and black stripes, or bright red with orange and black stripes. Check your local store for availability of your favorite color.
RTR – HIGH PERFORMANCE STRAIGHT FROM THE BOX
HPI makes it as easy as possible to get into Nitro RC cars. The HPI Ready-To-Run Nitro MT 2 G3.0 brings you the same high performance and quality that you expect from a high end racing kit, but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC car straight from the box! Just a few steps are needed to get your truck up and running, such as adding the batteries to the transmitter and receiver.
Full Assembly Instructions
As with all HPI cars and trucks, you get a full, in-depth instruction
manual with step by step instructions that allow you to easily disassemble and
reassemble your truck for maintenance and easy servicing. The manual also
includes a handy parts list and full-scale drawings of the parts and hardware.
High Quality Radio Gear
A high quality super narrowband AM "pistol grip" radio set is included for long range and precise control. The radio is fully compatible with popular RC car standards, so it's easily upgradeable and can be used with other cars as well. To run together with other cars, interchangeable crystals make switching frequencies a breeze!
10410 - Nitro MT2 G3.0 (RTR)
Factory assembled 4WD chassis with pre-painted body in your choice of red or blue, radio system and G3.0 engine.Also contains a detailed instruction manual. Pre-built and ready t
NitroRCX Essential Products