This is a 100% SECURE & SAFE online RC Hobby
e-commerce store powered by Yahoo!'s eCommerce
Solution
Buy
Online or Call Us (626)968-9860
100%
Satisfaction Guaranteed
HPI Racing has added a completely new 1/8th scale truck to its
market leading monster truck line up.
The new Hellfire is designed from scratch with only one goal:
maximum performance in all conditions! No
compromise - the Hellfire is not a converted buggy or tuned up
monster truck. It is purpose built to be faster and give
better handling than any other competitive truck.
A high level of attention to detail is paid in every area. HPI
designers strove to increase performance, reduce maintenance and
simplify chassis adjustments. The result is a new
definition for "performance truck".
Optimum Agility and Handling
Hellfire features all-new suspension and steering
geometries specially designed for best performance with
big truck wheels and on rough terrain.
A very low center of gravity gives increased
responsiveness and better chassis balance.
Toughest "Basher"
The Savage is HPI's proven fun "basher" with oversized
durability and maximum ground clearance.
No Jump too big, no ground too rough, and no stunt too
extreme - the Savage tackles it all. Simply the King
of Monster Trucks
Best Performing 1/8th scale HPI RTR Truck
Looking for maximum acceleration, agility, speed and
handling? Then Hellfire is for you! No Compromise!
Hellfire is extremely light weight and powered
by a new more powerful Nitro Star K4.6 HO engine.
The new engine is based on the proven HPI Nitro Star K4.6 known
from the Savage SS 4.6. The new "High Output" version provides
increased horse power and more torque.
Large dual stage air filter
Machined aluminum engine heat sink
8.5mm composite slide carburettor with 3 needles
Hard anodized exhaust pipe and header
Hellfire offers a wide range of tuning adjustments. You can
fine tune the truck to every condition or personal driving
style. All important suspension parameters are easily
adjustable. No option parts are necessary to adjust the
suspension settings and several configurations are possible
with the included parts. Eccentric bushings are used for a
convenient adjustment of toe in, kick up, anti dive and anti
squat.
Full List of Adjustments:
Front inboard toe
angle adjustments: 0 degrees to -2 degrees.
Rear inboard toe
angle adjustments: 2 degrees to 4 degrees.
Adjustable front and
rear camber using strong steel turnbuckles.
The camber can be
fine tuned to suit your track conditions.
Adjustable steering
geometry.
Spring clips are
included to fine tune your ride height.
Anti-dive
adjustments: 0 degrees to 2 degrees in 0.5 degree
increments.
Anti-squat
adjustments: 1.5 degrees to 3.5 degrees in 0.5 degree
increments.
Front kick-up angle:
adjustable from 21 to 25 degrees.
24 possible shock
positions available to fine tune your suspension.
Four different shock
pistons are included for a wide range of tuning options.
Different compression
and rebound can be achieved with tapered shock pistons.
Damping can be fine
tuned with different diameter holes.
Adjustable brake bias
to control entry steering and jumping.
Adjustable front and
rear inboard toe with convenient urethane eccentric
bushings.
Multiple mounting points for upper wishbone
Multiple mounting points on shock towers
Multiple mounting points on the steering plate for different
ackerman.
Aluminium wishbone braces and eccentric bushings.
Multiple mounting points on rear hub for upper wishbone
Multiple mounting points for shocks on wishbone
Adjustable turnbuckles
Adjustable body post
The Hellfire has been designed to allow for easier
maintenance with simplified access to all parts. For example
only 6 screws have to be removed to access the front or rear
diff without dismantling the main chassis or suspension.
High quality hex hardware is used throughout to reduce the
possibility of stripped screws. All major suspension
components are retained or captured without the use of
E-clips. Maintenance is simplified and parts are held more
securely in place.
Easy access to front and rear diffs
No e-clips
6 screws to get to the front and rear diff
The Hellfire will be available "Ready-To-Run"
making it the highest off-road performance truck available
to everybody.
A high quality HPI TF-3 radio set is included as well as a
1100 mAh, 5-cell receiver pack with 2 hour wall charger.
High Torque SF-2 servo
High quality HPI TF-3 transmitter
6V receiver pack and charger included
Water resistant radio box
Low center of gravity for optimal handling
Low center of gravity for optimal handling
Smooth chassis with countersunk screws
Recessed engine mount screws
Rolled chassis edges for increased chassis stiffness
Black anodized aluminum upper deck for increased chassis
rigidity
Front and rear chassis braces to support shock towers
High Power Nitro Star K4.6 HO engine for "insane" top speed
and accerleration
Hard anodized exhaust pipe for maximum power
Fuel tube routing for decreased fuel line breakage and better
fuel delivery
Internal fuel tank filter + external high quality fuel filter
for maximum protection for your engine
Long travel front suspension for excellent handling over rough
terrain
Long travel rear suspension for excellent handling over rough
terrain
Nitride coated shock shafts for smooth damping action
Front castor block and knuckle arm
Rear hub
E-clips free adjustable hinge pins
Easy access to center diff
Front and rear anti roll bars included for controlled chassis
roll
Water resistant radio box
Wire routing protects wires from moving around
Steel spur gear and hardened racing clutch bell for maximum
durability
17mm Hex hubs retained with pin and grub screw for maximum
durability and easy maintenance
Vented steel brake disks for optimal deceleration
Universal joint drive shaft on all four wheels for smooth
power transfer and optimal durability
Universal joint center drive shafts to front and rear
gearboxes for smooth power transfer and optimal durability
"Aggressors" tires for best traction
Tread pattern designed to suit a multitude of surfaces
Hellfire Specifications:
Wheelbase = 348mm*
Total Length = 513mm
Total Width = 415mm
Total Height = 173mm
Weight = 9.2 lb (ready to run, less fuel)
Reference Wheelbases: Savage = 335mm, 1/8 scale Buggy = 323mm
*Varies with Inboard Toe Setting
