| The AC6 Smart Charger (included
AC Adaptor) is one of today's most advanced type of smart charger. The AC6
can accept three types of Lithium batteries - LiIo, LiPo and LiFe. It offers
additional Lithium programming. Fast charge reduces the charging time of the
Lithium battery and the Storage mode controls the final voltage of the
battery to be suit for long time storage.
For the advanced user, the smart charger INCLUDES a PC based program that
can analyze the characteristic of the battery through the computers USB
port. The software will graph voltage, current, capacity and temperature
curves. It also shows the individual voltages of each cell in the Lithium
battery pack. Also feature LCD display and
High-quality aluminum case is durable and very
efficient to cool out the internal heat
Specification
Operating voltage: DC 11~18 volts
Charge/discharge power: max. 50/5 Watts
NiCd/MH: 1~15 cells
LiIo/LiPo/LiFe: 1~6 series
Pb: 2~20V
Charge current: 0.1 to 5.0A
Discharge current: 0.1 to 1.0A
No. of cycle: 1 to 5 times
Battery data memory: up to 5 data
Weight: 260g
Dimension: 140*95*28mm
Computer USB port
Temperature sensor port
Built in AC adapter
Optimized operating software
When charging or discharging, the smart charger offers
an AUTO function that sets the feeding current or the cell count of the
Lithium battery automatically. For Lithium batteries, this can prevent an
over-charging situation which can lead to an explosion should the user not
set the program correctly. Every program in the unit is programmed with
safety monitoring to validate the user information to ensure maximum safety.
These parameters can be set by the user.
High-power and high-performance circuit
The smart charger employs a circuit that has maximum
output power of 50W. As a result, the smart charger can charge or discharge
up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum
current of 5.0A.
Individual voltage balancer for Lithium
batteries inside
Built into the smart charger is an
individual-cell-voltage balancer. No external balancer is needed when
charging Lithium batteries (LiIo/LiPo/LiFe) for balance charging.
Balance individual cells on discharge
The smart charger also can monitor and balance
individual cells of the Lithium battery pack during the discharge process,
as well as the charge process. If the voltage of any one cell varies
abnormally, the process will be stopped with the error message.
Accept various types of Lithium battery
The smart charger can accept three types of Lithium
batteries - LiIo, LiPo and LiFe. They have different characteristics by
their chemistry, such as minimum, maximum, and charge termination voltages.
Lithium battery Fast and Storage mode
The smart charger offers additional Lithium
programming. Fast charge reduces the charging time of the Lithium battery
and the Storage mode controls the final voltage of the battery to be suit
for long time storage.
Data store/load
5 data of different batteries programs can be stored
and retrieved. These data files can be recetrived at any time you need them
without reprogramming.
Cyclic charging/discharging
The smart charger can perform 1 to 5 cycles of
charge>discharge or discharge>charge for battery break in/refreshing and
balancing.
PC based analysis using USB communication
For the advanced user, the smart charger INCLUDES a PC
based program that can analyze the characteristic of the battery through the
computers USB port. The software will graph voltage, current, capacity and
temperature curves. It also shows the individual voltages of each cell in
the Lithium battery pack.
Back-light LCD screen
Include LCD display
Robust outer aluminum case
High-quality aluminum case is durable and very
efficient to cool out the internal heat
Advanced temperature sensor cable port
(sensor cable not included)
An optional temperature probe contacting the surface
of the battery to monitor the battery temperature during charging can be
used
This unit comes with cables shown as well as CD &
Manual
 |
