The AceTiger is a 1/10 scale rally car. It is designed from the ground up with pure rally performance in mind. Performance features derived from rally cars have been shrunken down in size and engineered to deliver the utmost performance in a 1/10 scale rally car package. A composite chassis serves as the base of this rally car. Mounted on the front and rear are aluminum shock towers towering over the metal geared differentials. Attached to the robust towers are oil filled shocks providing plush and ground hugging dampening. The steering tie rods and upper and lower arms are adjustable for fine tuning of the toe and camber, effectively altering the handling characteristics of the machine.
This car has awesome power to weight ratio. The vehicle is easily propelled by the 540 sized high performance brushed motor. A brushed electronic speed controller delivers the current efficiently through an included 7.2v 1800mah Ni-Mh battery and charger. The brushed electronic speed controller is lipo ready and can accept 7.4v lipo batteries with a quick switch of a jumper switch. All of this power transfers through a shaft driven four wheel drive system providing ground clawing action through the performance wheels and rally spec tires. We recommend a Gens Ace 7.4v 3300mah lithium battery for an exponential increase in power and efficiency.
The Exceed AceTiger Rally car ready to run package also includes a 2.4ghz radio system. With frequency hopping technology, interference is a thing of the past. No longer do you have to worry about your specific channel. The radio system will automatically take care of that for you while you are focused on handling this beast of a machine.
With a body designed with rally car looks and aerodynamic performance, combined with a roof spoiler on the rear hatch. This scale rally machine will put a huge smile on your face when you see it four wheel power sliding through a corner spitting dirt and debris out the rear end.
1. Exceed design rally spec treaded tires
2. Exceed design rally body shell
3. Oil filled adjustable shocks
4. Aluminum shock towers
5. Front and rear metal gear differentials
6. Brushed Exceed ESC lipo-ready
7. 540 Brushed Motor
8. 4WD shaft drivetrain
9. Adjustable servo with saver
10. Steel hinge-pins with rounded foam front bumper
11. Exceed receiver with 2.4GHz technology
12. 7.2V 1800mAh NiMH battery
13. 12mm standard wheel hexes
1x 1:10 Exceed AceTiger Rally Car
1x 2CH 2.4Hz Transmitter
1x Battery Charger (100-240V)
1x 7.2v 1800mAh Ni-MH battery
1x Instruction Manual
Servo: 6KG (Waterproof)
Battery:NI-MH 7.2V 1800mA
Required to Run:
AA Batteries for Transmitter