Hobbywing EZRUN WP-S8A RTR Brushless ESC(100A) Waterproof 97P-BK2453 WP S8A
When you are ready to step up to Brushless and LiPo power for your 1/8-scale buggy or truggy, start off with a SPECS S8A-RTR Electronic Speed Controller. The S8A-RTR is designed for LiPo only, from 2S to 4S. You can tailor the ESC to match your vehicle and running conditions by way of multiple user-selectable settings like running mode, drag brake force, start control (punch) , and braking force. The built-in voltage cut-off is also user selectable based on how many battery cells you are using. One-button radio setup will have you driving in no time. The S8A-RTR ESC has a maximum output of 80-amps and an input voltage range from 7. 4v up to 14. 8v. That means you can run a 2S LiPo for backyard fun, a 3S LiPo for more punch, or a 4S LiPo for racing and speed runs. Large 4mm gold bullet plugs are pre-installed. The large cooling heatsink gets added airflow thanks to a built-in cooling fan. The cooling fan itself is protected from damage by the vented ESC case.
SPECS S8A RTR ESC Input Battery Types: 2-4S LiPo/LiFe only Maximum Current: 80-Amps BEC Output: 5V Controls: FWD/BRK, FWD/REV, FWD/BRK/REV Adjustable Low-voltage Cut-off Protection Throttle Signal Loss Protection Thermal Overload Protection Drag Brake Adjustment Start Control Adjustment (Initial Punch) Braking Force Adjustment ESC Dimensions (L*W*H) 2. 28x1. 81x1. 41-inches (58x46x36mm) NOTE! For use with SENSORLESS brushless motors only
Popular Best Sellers: